Welcome to the official website of Shanghai Radk-Tech Hydraulic Control System Co., Ltd.

language
    RTJ01
    +
    • RTJ01

    RTJ01


    Two-stage electro-hydraulic servo valve with double-spray nozzle

    Maximum operating pressure: 210bar
    Rated flow rate: 5L/min (measured at △P=70bar)
    • Product Description

      Product Description

    • Twin flapper-nozzle electrohydraulic servo valve

      Features and Benefits

      Frictionless double nozzle-baffle front stage
      High dynamic response
      High resolution, low hysteresis

      Dry torque motor and two stages of hydraulic power amplification.
      Can work at low pressure (1.1 MPa)
      Compact structure ,easy installation

      The output flow rate of the valve is related to the input command electrical signal and the pressure drop at the throttle of the valve. For a given valve
      pressure drop, the output flow rate of the valve can be calculated by the following equation

      Working Principle

      RTJ01 type two-stage electro-hydraulic servo valve can work at low pressure (1.1 MPa), with good dynamic response

      Structure:
      The valve consists of the following parts
      -Pilot stage:
      An electro-mechanical converter (torque motor)(1)
      One hydraulic amplifier (consisting of nozzle (5), baffle (6))


      -Power level:
      spool (8), valve sleeve (9) and other components
      -The spool is connected to the torque motor through mechanical feedback

      Working principle:
      In the torque motor coil (2) input - electrical signal, will produce electromagnetic
      force on the armature (3) ends to form an electromagnetic torque, then the
      armature deflection drive pipe spring (4) and baffle (6) deflection, baffle
      deviation from the middle will reduce the flow of a nozzle (5), and then change
      the pressure of the spool (8) - side of the nozzle, resulting in pressure difference
      to push the spool to one side. The displacement of the spool opens the oil circuit
      between the supply port (P port) and a control port (A or B). At the same time,
      the displacement of the spool generates a force through the feedback lever (7)
      connected to the baffle, forming a return torque to the armature. When the return
      torque is balanced with the electromagnetic torque, the baffle returns to the
      neutral position, and the pressure on both sides of the spool is equal. The spool
      displacement is proportional to the size of the input electrical signal, and the load
      flow rate is proportional to the spool displacement at a constant pressure drop.

    Keywords

    Get a Quote

    Note: Please leave your contact information, and our professionals will contact you as soon as possible!

    Submit

    Related Products

    No relevant data yet, please add it from the backend!